Cone-shaped flow meter is a new-style of high accuracy flow meter which can measure various of medium. A cone is positioned in the center of the pipe to block the liquid and create a differential pressure between upstream & downstream, this pressure difference can be corresponding to medium flowrate. Two pressure port are provided on two side of flow meter as high pressure port and low pressure port.
1. Apply to: Air, liquid & steam in pipe.
2. Pipe diameter: 15mm~2000mm or more.
3. Pressure grade: PN0.25～42.0
4.Accuracy: ±0.5% of measure value
5.Turndown: more than 10:1
6. Repeatability: ±0.1%
7. Standard Betas: 0.450-0.850
8. Pressure loss: % of differential pressure, varies with beta ratio.
9. Installation: 0-3D upstream, 0-1D downstream.
|
|
|
|
|
|
 |
| |
The ICG disk type automatic clean filter
Characteristic of Products: full-automatic online continuous filtration, adopt pneumatic drive, mesh which are mechanical type clean for permanent use, no need to stop the whole machine when collect or let out the debris.
Model of Products: WAF-ICG
Structure and work principle:
Use a clean disk with spring go up and down in the mesh, clean the collected debris. The liquid goes from up to the bottom, from inside mesh to outside. The debris which are easy-cleaning left in the mesh surface, and collected into collection room. When they go down, the debris are cleaned by the disk into the collection room. When they go up, the disk clean them from the mesh surface, and fluid bring along them through the disk ,go into the collection and let them out.
Features:
§ no value product lost because of clean the cartridge
§ no replace cartridge cost and the processing expense
§ mechanical type clean permanent cartridge
§ reduce the risk of operator contacting dangerous material
§ reduce the environmental pollution
§ reduce the labor force demand, not need to replace the cartridge
§enhance the profit margin, enhance the whole efficiency, reduce the work suspension repair period
§long using life, high accuracy, good resistant to corruption
§space-save design, compact structure
§no need to stop the whole machine when collect or let out the debris
§work automatically
|
|
|
|
|
|
|
|
|
